14WAY CONSUMER UNIT SPD - HI-INTEGRITY SPLIT

Click to enlarge



14WAY CONSUMER UNIT SPD - HI-INTEGRITY SPLIT

100A MAIN SW 2X100A RCD SPD TYPE2

HAGER

DIST - CONS

(Product Code: VML914CUSPD)

£173.83
( each exc VAT )
Including VAT

QTY Price(exc VAT)
1 - 2 £ 173.83
3 - 999999 £ 171.64

Hager VML910CUSPD Design10 18th Edition All Metal 10 Way High Integrity Twin RCD Flexible Split Load Consumer Unit 100A Switch Disconnector Isolator, 2 x 100A 30mA RCDs & Type 2 Surge Protection Device

 

The Hager VML910CUSPD Configurable all metal consumer unit is fully compliant with the 18th Edition of BS 7671:2018. A twin RCD split load configuration protecting a configurable bank of 10 MCBs RCBOs split into two circuits, the unit is supplied with 100A switch isolator and 2 x 100A 30mA RCDs. 

 

The metal enclosure comes supplied with a full metal DIN rail and full complement of earth and neutral terminals along with marking labels, busbar and instructions.

 

 

 

Features • 1 x 100 Amp DP Main switch controls the entire board and allows for up to 10 x RCBO's or MCB's circuits  • 2 x 100 Amp 30mA RCD allowing form RCD circuits to be split around a building  • Max No of MCB's or RCBO's = 10  • Dual 100 Amp 30mA RCD Protection  • Allows 100% RCD Protection  • Option for High Integrity with Individual RCBOs  • Allows for RCD Exemptions on MCBs  • Main Switch controls all circuits  • Second RCD for 2nd Group of Circuits

 

Range Overview The Hager Design 10 is a functional board created for all applications. As with all models in the range, there is ample cable space available even when RCBOs are fitted. The top mounted terminal rail makes the wiring of the neutral and earth connections neat and simple. Multiple fixing points, and a full metal DIN rail ensure the devices sit square.

 

100A Consumer unit enabling conformity with 18th Edition wiring regulations for overload protection of RCCBs and switches, in any single phase residential application regardless of the current rating to the supply authority fuse. Type A RCDs are provided, these devices can detect AC sinusoidal waveforms and pulsating DC components.

 

Technical Info • Multiple fixing points • All Design 10 consumer units contain top, bottom and rear knockouts and a meter tail cable entry plate as standard  • No restrictions under the DIN rail  • Cable entries positioned for easy access to devices  • Cable entry protectors to prevent damage to cable caused by sharp edges  • Rear cutouts optimised to give neater installation  • Terminal bars are top mounted allowing for easy cable dressing - fully rated to 100A • Conforms to BS EN 6439-3 including Annex ZB (16kA rating)  • Full range of accessories available

 

Dimensions Height (mm): 246 Width (mm): 406 Depth (mm): 83100

 




WRITE YOUR REVIEW

Only registered users can write reviews. Please, log in or register

DELIVERY OPTIONS

 

Collections from our trade counter are free.

Standard Delivery

Our standard deliverys are between the hours of 8am and 6pm Monday to Friday excluding national Holiday's.

Please also note certain Items may require additional delivery charges, such as Conduit, and Fluorescent tubes.

we use secure couriers and offer a free delivery on orders over and above £50.00 excluding VAT (£60.00 inclusive). For orders below this amount we charge £6.50 + vat (£7.80 incl). Certain products are excluded from national delivery due to weight and fragility, these are identified on each item.

Delivery is normally 2-3 days, unless a special item has been ordered. In this case we will keep you advised on the lead time. 

When entering your address details, our system will prompt for delivery address postcode, please key in as example (e.g. SM3 9AG). Any delivery charge will be automatically calculated. Our system should advise you when finishing your delivery options. However please call if you believe this has not gone through correctly.

SPECIAL DELIVERY

We can offer next day delivery and timed deliveries where required, these are on a price on application basis so please call us prior to placing your order so that we can advise costs.

 

Any questions about the above, please email us on sales@powerpointelectrics.co.uk or call on 0208 330 3345